Blog

Expand your skills. Get new features first. Was this information helpful? Yes No. Thank you! Any more feedback? The more you tell us the more we can help. Can you help us improve? Resolved my issue. Clear instructions. Easy to follow. No jargon. Pictures helped. Didn’t match my screen.

Incorrect instructions. Too technical. This account might not have sufficient rights to access required network resources for the installation. Use this parameter to provide a bulk registration token. An internet-based device uses this token in the registration process through a cloud management gateway CMG.

For more information, see Token-based authentication for CMG. If CCMSetup. If you’re using a script to run CCMSetup. It might not correctly report installation details to the script. This parameter specifies that CCMSetup. You can enter more than one value. Use the semicolon character ; to separate each value.

For more information on client prerequisites, see Windows client prerequisites. Specifies the file download location. Use a local or UNC path. The device downloads files using the server message block SMB protocol.

Use this parameter to uninstall the Configuration Manager client. For more information, see Uninstall the client. Starting in version , when you uninstall the client it also removes the client bootstrap, ccmsetup. Specify this parameter for the client to use a PKI client authentication certificate. If you don’t include this parameter, or if the client can’t find a valid certificate, it filters out all HTTPS management points, including cloud management gateways CMG.

The client uses an HTTP connection with a self-signed certificate. If a device uses Azure Active Directory Azure AD for client authentication and also has a PKI-based client authentication certificate, if you use include this parameter the client won’t be able to get Azure AD onboarding information from a cloud management gateway CMG.

In some scenarios, you don’t have to specify this parameter, but still use a client certificate. For example, client push and software update-based client installation. Also specify this parameter when you install a client for internet-only communication. For more information about internet-based client management, see Considerations for client communications from the internet or an untrusted forest.

Specify this parameter to manually upgrade an excluded client. For more information, see How to exclude clients from upgrade. Use this ccmsetup. Include other parameters and properties inside quotation marks “. Example: ccmsetup. The following properties can modify the installation behavior of client. You create or import the client app when you configure Azure services for Cloud Management. An Azure administrator can get the value for this property from the Azure portal.

For more information, see get application ID. Specifies the Azure AD server app identifier. You create or import the server app when you configure Azure services for Cloud Management. In Azure Active Directory , find the server app under App registrations. Open the app, select Settings , and then select Properties. Specifies the Azure AD tenant identifier. Configuration Manager links to this tenant when you configure Azure services for Cloud Management.

To get the value for this property, use the following steps:. On a device that runs Windows 10 or later and is joined to the same Azure AD tenant, open a command prompt. In the Device State section, find the TenantId value. For example, TenantId : bf6f-4d5d-b3dc33fdd49a.

An Azure administrator can also obtain this value in the Azure portal. For more information, see get tenant ID. Specifies one or more Windows user accounts or groups to be given access to client settings and policies. This property is useful when you don’t have local administrative credentials on the client computer. Specify a list of accounts that are separated by semicolons ;. When you use this property, the computer restarts without warning. This behavior occurs even if a user is signed in to Windows.

To specify that the client is always internet-based and never connects to the intranet, set this property value to 1. The client’s connection type displays Always Internet. Use this property to specify the certificate issuers list. This list includes certificate information for the trusted root certification authorities CA that the Configuration Manager site trusts.

This value is a case-sensitive match for subject attributes that are in the root CA certificate. Separate attributes by a comma , or a semicolon ;. Specify more than one root CA certificate by using a separator bar. Use the value of the CertificateIssuers attribute in the mobileclient. For more information about the certificate issuers list and how clients use it during the certificate selection process, see Planning for PKI client certificate selection.

Starting in version , this property can be used to skip checking the subject name for the certificate. If the client has more than one certificate for HTTPS communication, this property specifies the criteria for it to select a valid client authentication certificate.

If you use the Subject Name, the Subject keyword is case-sensitive, and the SubjectStr keyword is case-insensitive. For the complete list of attributes that you can use for certificate selection, see Supported attribute values for PKI certificate selection criteria.

If the client installer can’t locate a valid certificate in the default Personal certificate store for the computer, use this property to specify an alternate certificate store name.

This property enables debug logging when the client installs. This property causes the client to log low-level information for troubleshooting. Avoid using this property in production sites. Excessive logging can occur, which might make it difficult to find relevant information in the log files.

For more information, see About log files. The frequency in minutes at which the client health evaluation tool ccmeval. Specify an integer value from 1 to By default, ccmeval runs once a day minutes. For more information on client health evaluation, see Monitor clients. The hour during the day when the client health evaluation tool ccmeval. Specify an integer value from 0 midnight to 23 PM.

By default, ccmeval runs at midnight. If you set this property to 1 , the client selects the PKI certificate with the longest validity period. If the client is managed over the internet, this property specifies the FQDN of the internet-based management point. Directly assign internet-based clients to an internet-based site. This property can specify the address of a cloud management gateway CMG.

For example: ccmsetup. Specifies the port for the client to use when it communicates over HTTP to site system servers. By default, this value is Use this property to set the folder to install the Configuration Manager client files.

Regardless of where you install the client files, it always installs the ccmcore. Sign up or log in Sign up using Google. Sign up using Facebook.

Sign up using Email and Password. Post as a guest Name. Email Required, but never shown. Browse other questions tagged sccm or ask your own question. The Overflow Blog. Remote work is killing big offices. Cities must change to survive. You should be reading academic computer science papers. Navigation and UI research starting soon. Related 2. Hot Network Questions. Question feed. Accept all cookies Customize settings.

Ccmsetup.exe free download. About client installation parameters and properties in Configuration Manager

Не в этом дело, – дипломатично ответила Мидж, понимая, что ступает на зыбкую почву.  – Еще не было случая, чтобы в моих данных появлялись ошибки. Поэтому я хочу узнать мнение специалиста. – Что ж, – сказал Джабба, – мне неприятно первым тебя разочаровать, но твои данные неверны.

Ccmsetup.exe free download

For multiple accounts, they are required. If you do not use quotation marks for multiple accounts, the first account is the only account applied.

Values can be 0 off or 1 on. The default value is 0. This causes the client to log low-level information that might be useful for troubleshooting client problems. Use this command-line switch only in your test lab environment. As a best practice, avoid using this property in production deployments because excessive logging can occur. By default, logging is disabled. The log files are stored in the Logs folder in the Advanced Client installation folder. Specify an integer ranging from 0 to 3, where 0 is the most verbose logging, and 3 logs only errors.

The default is 1. Set logging level to 0 verbose mode to provide messages that allow component operations to be traced:. If this property is set to 0, no history is kept. For example, to keep one version of the log file:. When a log grows to the size that is specified, it is renamed as a history file, and a new file is created. This property must be at least The default value is For example, to allow for a maximum log file size of 20, bytes before the file is renamed as a history file and a new file is created:.

This can be a relative or absolute path. If this property is not set, the cache is installed to a folder named Cache in the folder where the Advanced Client is installed. The syntax for this property is:. Use quotation marks around folder paths that contain spaces. If folder paths do not contain spaces, quotation marks are optional.

When it is finished, check the most recent log again to see movement till it stops. Probably it will be another file than the one you opened first.

When all the logs stop updating — most likely that the client is registered and working. For particular registration on the Primary Site, you can open the log:. Execute [Run now] on both of the actions and close the window. Wait till all the logs will stabilize again. There should be more than 2 Actions — around You may check that all your settings are working correctly with the information in the [General] tab. You may check there to see if downloading process has really started as it is stated in the application.

This site uses Akismet to reduce spam. Learn how your comment data is processed. You can also check most distributed file variants with name ccmsetup. This files most often belongs to product System Center Configuration Manager. This files most often have description ccmsetup. This is executable file. When you upgrade an existing client, the client installer ignores this setting.

The client also ignores the cache size when it downloads software updates. The previous size is the minimum value. Use this property to specify the location and order that the client installer checks for configuration settings. It’s a string of one or more characters, each defining a specific configuration source:.

For more information, see Provision client installation properties. P : Check for configuration settings in the installation properties from the command line. By default, the client installer uses PU. It first checks the installation properties P and then the existing settings U. Specifies a list of management points for the Configuration Manager client to use.

Use a semicolon ; as the delimiter when specifying multiple management points. If the client can’t get the Configuration Manager trusted root key from Active Directory Domain Services, use this property to specify the key.

Get the value for the site’s trusted root key from the mobileclient. For more information, see Pre-provision a client with the trusted root key by using a file. Use this property to reinstall the Configuration Manager trusted root key. It specifies the full path and name of a file that contains the trusted root key. Specifies the full path and name of the exported self-signed certificate on the site server.

The site server stores this certificate in the SMS certificate store. Export the certificate without the private key, store the file securely, and access it only from a secured channel. This property specifies a Configuration Manager site to which you assign the client. This value can either be a three-character site code or the word AUTO. If you specify AUTO , or don’t specify this property, the client attempts to determine its site assignment from Active Directory Domain Services or from a specified management point.

Directly assign the client to its site by specifying the site code. This property forces CCMSetup to send a location request to the management point to get the latest version of the Configuration Manager client installation source. There are several scenarios where this property is especially useful:. Pre-production clients. A newly installed client uses the production baseline because it can’t evaluate the pre-production collection until the client is installed. In that scenario, after the client is installed and it evaluates policy, it will later upgrade to the pre-production client version.

Use this property so that the device immediately installs the latest version of the client. This scenario also includes when using Autopilot into co-management. Use this property to make sure the newly provisioned Autopilot device uses the pre-production client version right away.

Pull distribution points. Allow pull distribution points to install the latest client version even if it’s not in the pre-production collection. This action makes sure that the client version on the pull distribution point is the same as the distribution point binaries.

If these versions aren’t the same, it may cause issues. Configuration Manager supports the following attribute values for the PKI certificate selection criteria:. If you use the client push installation method , use the following options on the Client tab of the Client Push Installation Properties in the Configuration Manager console:.

The following subset of CCMSetup. Skip to main content. This browser is no longer supported. Table of contents Exit focus mode. Table of contents. Tip If a parameter value has spaces, surround it with quotation marks. Stop proceeding. CCMSetup will then immediately exit and not perform the upgrade.

Important This parameter specifies an initial management point for computers to find a download source, and can be any management point in any site. Note Starting in version , when you uninstall the client it also removes the client bootstrap, ccmsetup. Note In some scenarios, you don’t have to specify this parameter, but still use a client certificate. Note An Azure administrator can also obtain this value in the Azure portal. Important When you use this property, the computer restarts without warning.

Tip Use the value of the CertificateIssuers attribute in the mobileclient. Important If you use the Subject Name, the Subject keyword is case-sensitive, and the SubjectStr keyword is case-insensitive.

Tip Regardless of where you install the client files, it always installs the ccmcore. Note You don’t have to specify this property if the client is in the same domain as a published management point. Important If you install the Configuration Manager client without installing App-V, you can’t deploy virtual applications. Note If the task sequence installs software updates or applications, clients need a valid client authentication certificate.

Tip The deployment’s purpose can be either available or required. Note This method may have additional prerequisites. Regardless the method, only use this property with ccmsetup. For example: Cloud Services group: Enable clients to use a cloud management gateway and Allow access to cloud distribution point Computer Agent group: PowerShell execution policy If devices don’t need these client settings after the task sequence completes, deploy new custom client settings to reverse the default settings.

Important Client settings are available for specifying the client cache folder size. Tip Get the value for the site’s trusted root key from the mobileclient. Submit and view feedback for This product This page.

View all page feedback. Additional resources In this article.